sge_execd and load sensors

[cjf001]

Hi, quick question - does anyone know how often the
sge_execd runs the load sensors configured for an
execution host ? Is that time configurable anywhere ?

Thanks,

John
--
###########################################################################
# John Foley # Location: IL93-E1-21S #
# IT & Systems Administration # Maildrop: IL93-E1-35O #
# LV Simulation Cluster Support # Email: ***@motorola.com #
# Motorola, Inc. - Mobile Devices # Phone: [phone] #
# 600 North US Highway 45 # Fax: [phone] #
# Libertyville, IL. 60048 (USA) # Cell: [phone] #
###########################################################################
(this email sent using SeaMonkey on Windows)

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=302588

To unsubscribe from this discussion, e-mail: [users-***@gridengine.sunsource.net].

[ppk]

qconf -sconf | grep load_report
load_report_time 00:00:40

man sge_conf

load_report_time
System load is reported periodically by the
execution daemons to ge_qmaster(8). The parameter
load_report_time defines the time
interval between load reports.

Each ge_execd(8) may use a different load report
time. Changing load_report_time will take immediate effect.

Note: Be careful when modifying load_report_time.
Reporting load too frequently might block ge_qmaster(8)
especially if the number
of execution hosts is large. Moreover, since the
system load typically increases and decreases smoothly,
frequent load reports
hardly offer any benefit.

The default for load_report_time is 40 seconds.

The global configuration entry for this value may be
overwritten by the execution host local configuration.

Prakashan

Post by cjf001
Hi, quick question - does anyone know how often the
sge_execd runs the load sensors configured for an
execution host ? Is that time configurable anywhere ?
Thanks,
John

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=302627

To unsubscribe from this discussion, e-mail: [users-***@gridengine.sunsource.net].

[cjf001]

Thanks !

John

Post by ppk
qconf -sconf | grep load_report
load_report_time 00:00:40
man sge_conf
load_report_time
System load is reported periodically by the execution daemons to
ge_qmaster(8). The parameter load_report_time defines the time
interval between load reports.
Each ge_execd(8) may use a different load report time. Changing
load_report_time will take immediate effect.
Note: Be careful when modifying load_report_time. Reporting load too
frequently might block ge_qmaster(8) especially if the number
of execution hosts is large. Moreover, since the system load typically
increases and decreases smoothly, frequent load reports
hardly offer any benefit.
The default for load_report_time is 40 seconds.
The global configuration entry for this value may be overwritten by the
execution host local configuration.
Prakashan

Post by cjf001
Hi, quick question - does anyone know how often the
sge_execd runs the load sensors configured for an
execution host ? Is that time configurable anywhere ?
Thanks,
John

--
###########################################################################
# John Foley # Location: IL93-E1-21S #
# IT & Systems Administration # Maildrop: IL93-E1-35O #
# LV Simulation Cluster Support # Email: ***@motorola.com #
# Motorola, Inc. - Mobile Devices # Phone: [phone] #
# 600 North US Highway 45 # Fax: [phone] #
# Libertyville, IL. 60048 (USA) # Cell: [phone] #
###########################################################################
(this email sent using SeaMonkey on Windows)

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=302805

To unsubscribe from this discussion, e-mail: [users-***@gridengine.sunsource.net].